The insight and ability necessary to take care of your trees’ long term health is what sets Tuft’s Tree Service apart in the industry. We are experts at pruning, reducing, thinning, cabling or bracing- whatever it takes to make sure things are as they should be.
Beginning with Species and site specifics, Tuft’s will give you and unbiased view into present and future dangers concerning your trees. Or, alleviate any fears or concerns you may have.
You can trust the depth and breadth of our years of experience in tree care.
Complete tree and stump removal is available and will vary in pricing depending on size, location, and degree of expertise necessary. We have all the equipment necessary to perform removals in most any location or over most any structure. Our stump grinder can fit through most any space, especially where other’s hydraulically driven units are incompatible.
At a basic level, this can include removal of major deadwood, problem or structurally compromised branches; clearance from structures and canopy raising.
Taking it further, this can include pruning and thinning for light infiltration, reduced wind resistance, shaping and overall aesthetics & beauty.
Tree trimming has four classes established by the National Arborist Association to accommodate varying work needs in concern to tree trimming.
Fine tree trimming is recommended for premium quality work with an emphasis on aesthetic considerations in addition to structural enhancement. Fine tree trimming consists of the removal of dead, dying, diseased, decayed, interfering, objectionable, obstructing, and weak branches, as well as selective thinning to lessen wind resistance. The removal of such described branches is to include those on the main trunks, as well as those inside the leaf area.
Standard tree trimming is recommended where aesthetic considerations are secondary to structural enhancement and tree health concerns. Standard tree trimming consists of the removal of dead, dying, diseased, decaying, interfering, objectionable, obstructing, and weak branches, as well as selective thinning to lessen wind resistance.
Hazard tree trimmings recommended where safety considerations are paramount. Hazard tree trimming consists of the removal of dead diseased, decayed, and obviously weak branches, two inches (5 cm) in diameter or greater.
Crown tree trimming reduction consists of the reduction of tops, sides or individual limbs. This practice is to be undertaken only for the following reasons:
In situations where branches interfere with utility lines.
When there has been significant crown dieback.
When it is necessary to achieve specific topiary training or dwarfing.
In cases where, due to storm damage or prior incorrect pruning, it is appropriate to trim for safety and aesthetic reasons.